Accufast Pregnancy Kit With 2 Tests

Open the sealed foil pouch and remove one test stick just before use.
Pull off the protective cap to expose the absorbent tip.
You may either hold the absorbent tip directly in your urine stream for a few seconds or collect urine in a clean, dry cup and dip the tip into the urine without going past the marked line.
After applying urine, place the test on a flat surface with the result window facing upward.
Allow the test to sit undisturbed and read the result after about five minutes.
Do not read the result after ten minutes, as this may give an inaccurate result.

When reading the result, two visible lines—one in the control area marked “C” and one in the test area marked “T”—indicate a positive result, meaning pregnant.
One line appearing only in the control area indicates a negative result, meaning not pregnant.
If no line appears in the control area, the result is invalid and the test should be repeated with a new stick.

For best accuracy, it is recommended to use first-morning urine, especially if testing early.
If the result is negative but your period is late or you still suspect pregnancy, repeat the test after two to three days using the second test in the kit.
Each test stick is intended for single use only and unused tests should be stored at room temperature in their sealed packaging.